Chloro(2-methylallyl)palladium(II) dimer, Dichlorobis(2-methylallyl)dipalladium
Bis(2-methylallyl)palladium chloride dimer
CAS: 12081-18-4
Molecular Formula: C16H28Cl2Pd2
Chloro(2-methylallyl)palladium(II) dimer, Dichlorobis(2-methylallyl)dipalladium - Names and Identifiers
| Name | Bis(2-methylallyl)palladium chloride dimer |
| Synonyms | Nsc270885 dichloroniopalladium palladium(+2) cation 2-methanidylprop-1-ene Chloro(2-methallyl)palladium Bis(2-methylallyl)palladiumchloridedimer BIS(2-METHYLALLYL)PALLADIUM CHLORIDE DIMER Bis(2-methylallyl)palladium chloride dimer Palladium, di-.mu.-chlorobis(2-methyl-.pi.-allyl)di- Chloro(2-methylallyl)palladium(II) dimer, Dichlorobis(2-methylallyl)dipalladium Chloro(2-methylallyl)palladium(II) dimer, Dichlorobis(2-methylallyl)dipalladium |
| CAS | 12081-18-4 |
| InChI | InChI=1/2C4H6.2ClH.2Pd/c2*1-4(2)3;;;;/h2*1H,2H2,3H3;2*1H;;/q2*-2;;;2*+2/r2C4H6.Cl2H2Pd.Pd/c2*1-4(2)3;1-3-2;/h2*1H,2H2,3H3;1-2H;/q2*-2;2*+2 |
Chloro(2-methylallyl)palladium(II) dimer, Dichlorobis(2-methylallyl)dipalladium - Physico-chemical Properties
| Molecular Formula | C16H28Cl2Pd2 |
| Molar Mass | 504.14 |
| Melting Point | 168.2-174.0°C |
| Vapor Presure | 2140mmHg at 25°C |
| Appearance | Powder |
| Color | yellow |
| Storage Condition | 2-8°C |
| Sensitive | air sensitive |
| MDL | MFCD08561141 |
| Use | This product is for scientific research only and shall not be used for other purposes. |
Chloro(2-methylallyl)palladium(II) dimer, Dichlorobis(2-methylallyl)dipalladium - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | 26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
| WGK Germany | 3 |
Chloro(2-methylallyl)palladium(II) dimer, Dichlorobis(2-methylallyl)dipalladium - Introduction
Bis (2-methylallyl) palladium chloride, chemical formula PdCl2(C5H5CH3)2, is an organic palladium compound.
Nature:
Bis (2-methylallyl) palladium chloride is orange-red crystal, stable at room temperature. It has good solubility, soluble in alcohol, ether and organic solvents, insoluble in water. It has good catalytic activity and selectivity, and is widely used in organic synthesis reactions.
Use:
Bis (2-methylallyl) palladium chloride can be used as a catalyst and is commonly used in carbon-carbon bond formation reactions and oxidation reactions. It is often used in organic synthesis for the substitution of aromatic compounds such as benzene, the oxidation of alcohols, the hydrogenation of olefins and other reactions. In addition, it can also be used in dye synthesis and pharmaceutical fields.
Method:
Bis (2-methylallyl) palladium chloride can be prepared by reacting palladium chloride with 2-methylallyl bromide. In the laboratory, often use the ether solution of allyl magnesium bromide and palladium chloride to obtain the product.
Safety Information:
Bis (2-methylallyl) palladium chloride needs to be safe during use and storage. It is a toxic and irritating substance, and direct contact with the skin and eyes should be avoided. Appropriate protective equipment such as safety glasses, gloves and laboratory ventilation is required during operation. In addition, it also needs to be stored in a dry, well-ventilated place to avoid reacting with oxygen, oxidants, etc. or encountering fire sources.
Nature:
Bis (2-methylallyl) palladium chloride is orange-red crystal, stable at room temperature. It has good solubility, soluble in alcohol, ether and organic solvents, insoluble in water. It has good catalytic activity and selectivity, and is widely used in organic synthesis reactions.
Use:
Bis (2-methylallyl) palladium chloride can be used as a catalyst and is commonly used in carbon-carbon bond formation reactions and oxidation reactions. It is often used in organic synthesis for the substitution of aromatic compounds such as benzene, the oxidation of alcohols, the hydrogenation of olefins and other reactions. In addition, it can also be used in dye synthesis and pharmaceutical fields.
Method:
Bis (2-methylallyl) palladium chloride can be prepared by reacting palladium chloride with 2-methylallyl bromide. In the laboratory, often use the ether solution of allyl magnesium bromide and palladium chloride to obtain the product.
Safety Information:
Bis (2-methylallyl) palladium chloride needs to be safe during use and storage. It is a toxic and irritating substance, and direct contact with the skin and eyes should be avoided. Appropriate protective equipment such as safety glasses, gloves and laboratory ventilation is required during operation. In addition, it also needs to be stored in a dry, well-ventilated place to avoid reacting with oxygen, oxidants, etc. or encountering fire sources.
Last Update：2024-04-10 22:29:15
Supplier List
Product Name: (2-Methylallyl)palladium(II) chloride dimer Visit Supplier Webpage Request for quotation
CAS: 12081-18-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 12081-18-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: (2-Methylallyl)palladium(II) chloride dimer Visit Supplier Webpage Request for quotation
CAS: 12081-18-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 12081-18-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History